Appendix

Verified Supported Hardware

Note: Due to the sheer volume of boards and sensors that are capable of being used it is impossible to test each one and verify that it will work as a drop-in replacement. Due to this fact this guide is written based around the commonly available BigTreeTech hardware. If a board or sensor is not listed that does not indicate that it will not work.

Mainboards

  • BigTreeTech Octopus and Octopus Pro v1.1

  • BigTreeTech SKR Mini E3 V3

  • BigTreeTech SKR V1.4 Turbo

Toolboards

  • BigTreeTech EBB36

  • ELEGOO Centauri Carbon stock toolboard

Auto Bed Leveling Sensors

  • BigTreeTech Eddy Coil and Eddy Duo

Filament Sensors

  • BigTreeTech SFS v2.0

Kalico Board Configurations

Mainboard with stock toolboard

Check https://git.devminer.xyz/DevMiner/elegoo-centauri-klipper.

Mainboard with replacement toolboard

⚠️ Make sure to download the additional .cfg files from the repository.

Printables